This unique adjustable fixture offers all the benefits
of a dedicated fixture at a much lower cost

--------------------------------------------------------------------------------

Features of our Adjustable Wave Solder Pallet:

Fits all pallet and finger conveyor machines.

The composite materials are light weight, chemically resistant, static dissipative, and have a thermal expansion rate very close the materials used in circuit board fabrication.

Rails with adjustable clips allow overhanging component clearance as well as easy loading and unloading. Spring loaded ends on rails ensure even and consistent PCB holding.

Stiffeners and frame sides also act as solder dams.

Adding crossbars, overhead supports and adjustable clips allows virtually any size or shape PCB to be held or supported throughout the wave solder process.

Frames are easily adapted to run on most semi- automatic insertion machines.

Provide gold finger masking and connector clearance.


Parts Description of our Adjustable Wave Solder Pallets:

Frames
Stainless hardware is captive, meaning it cannot be separated from the unit. In addition tools are NOT required to make adjustments. The outside frame rails have a 7/16" PCB support groove built in which can be used for gold finger masking or connector clearance. This also reduces the number of rails needed per fixture and allows maximum use of machine capacity.

Crossbars
All crossbars come with two, movable 3" PCB supports which also prevent warping. Different attachments can also be added to mask gold fingers or hold down components as required.

Overhead Pickup Bars
Have a hinged bracket on one end with a crossbar holddown on the opposite end for easier loading and unloading. In the center it has an adjustable spring loaded plunger hook which is used to support large PCB's that have at least a 1/8" tooling hole or slot somewhere near the center of the PCB. This prevents bowing.

Adjustable Rails
These have three features that truly make this type of fixture adjustable:

Fixed Rail Ends have ends that are locked into position on the outside frame first before adjusting the spring loaded rail.